Specification Sheet

© All copyright and other property in this document is reserved by Cavity Sliders USA Inc. Details and specifications are subject to change without notice.
Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. ® CAVILOCK is a Registered Trademark.
CAVILOCK LAVILOCK™ (O.D. 1995). 60242 - 07.2014
Dimensions
Finish Options & Configurations
Inside Restroom
LH (EF)
Inside Restroom
RH (EF)
Handing
When standing looking into the
pocket, if the locking snib is on
your left hand side then the
LaviLock is a Left Hand lock.
EF = Exit Free - Even when in locked position the handle
on the inside remains unlocked.
When standing looking into the
pocket, if the locking snib is on
your right hand side then the
LaviLock is a Right Hand lock.
Drawings & pictures are not to scale. All dimensions in inches (and mm).
STRIKER
C
avi
L
oc
K
(75)
105/16” (262)
(14)
(25)
(24)
(176)
(74)
(10)
BACKSET
213/64”
(56)
253/64”
(72)
FRONT
SIDE
(3)
229/32”
25/64”
25/64”
25/32”
55/32” (131)
659/64”
3”
1”
9/16”
1/8”
15/16”
25/64”
9/32”
(7)
(10)
(20)
(10)
The LaviLock is supplied as a complete set including:
Lever Handles
Stainless Steel Indication Plates
Slide Locking Buttons including
Emergency Release
CL100 Mortise Lock Case
IMPORTANT: Hardware must be mounted by installers
no higher than 48 in (1220 mm) above the finished
floor and the clear width of the door opening must be a
minimum of 32 inches and a maximum of 48 inches for
the accessible door passage to meet ADA guidelines.
Satin Chrome Polished Brass
CL100B3008 (RH) CL100B3009 (RH)
CL100B3010 (LH) CL100B3011 (LH)
Construction
Case: Die cast Zinc
Internal Parts: Bronze/Brass
Screws, springs etc: Stainless Steel
Faceplate & striker: Brushed Stainless Steel
or Brass (depending on
finish req.)
CL100 Mortise Lock Features
The CL100 Mortise Lock is a versatile mortise that has
many different internal and external hardware options.
The internal components have been built to resist
corrosion, making it suitable for both internal
and external use in commercial, architectural and
residential applications.
Suitable for pocket
doors and surface
sliding doors
Easy to operate
Corrosion resistant
For use with timber or
aluminum doors
Cavity Sliders USA Inc.
PO Box 1392
Culver City
CA 90232
T [phone]
[phone]
F [phone]
E [e-mail]
Another quality product from:
www.cavitysliders.com
High quality
New Zealand made
products
*If LaviLock is to be installed into areas where there is
exposure to corrosive environments, e.g. high chlorine or salt
concentration, contact us for an appropriate solution.