Specification Sheet

CS WallMountTrack with clear anodized ﬁnish.

CS TrackSystems are

an innovative range

of track systems

designed for a

multitude of sliding

doorway applications.

CS WallMountTrack

is suitable for surface

sliding applications

where there is enough

strength in the wall

to side mount a track

system above an

opening.

Installation is quick

and easy as the track

is supplied with pre-

machined ﬁxing slots.

The track also comes

with a pre-ﬁnished,

removable aluminum

fascia and end caps

that neatly conceal the

top of the door, track

and carriage system.

CS WallMountTrack

PAGE 1
CS TrackSystems are an innovative range of track systems designed for a multitude of sliding doorway applications. CS WallMountTrack is suitable for surface sliding applications where there is enough strength in the wall to side mount a track system above an opening. Installation is quick and easy as the track is supplied with premachined fixing slots. The track also comes with a pre-finished, removable aluminum fascia and end caps that neatly conceal the top of the door, track and carriage system.
PAGE 2
Design Features & Options Technical Information 63mm (2-1/2”) Available as a single track set-up only, i.e. no double or triple track versions are available. 63mm Track can be configured to suit Bi-Parting door setups. Fascia may be anodized or powder coated in a range of color options. Standard stocked finishes available: Clear or Bronze Anodized. Inquire about custom colors. © All copyright and other property in this document is reserved by Cavity Sliders USA Inc.