Manual

Diagram 2：iDAC-6 Rear Panel illustration
Rear Panel Functional Description
1. Single-ended connector (RCA)
Connect the single-ended output of the DAC to the single-ended input of an
amplifier with a pair of RCA audio signal cable, please make sure the left and
right channel is connected correctly.
2. Balanced connector (XLR)
Connect the balanced output of the DAC to the balanced input of an amplifier with
a pair of XLR audio signal cable, please make sure the left and right channel is
connected correctly.
3. USB
Connect the USB port of the DAC to the USB port of a computer with a USB
cable (provided in the product package)
4. OPT (Optical)
Connect the optical input digital audio signal of the DAC to the Optical output
digital audio signal of a player with a Toslink (Optical) cable.
5. COAX (Coaxial)
Connect the coaxial input digital audio signal of the DAC to the Coaxial output
digital audio signal of a player with a standard 75ohm coaxial cable.
6. AES/EBU
Connect the AES/EBU input digital audio signal of the DAC to the AES/EBU
output digital audio signal of a player with a standard 110ohm AES/EBU (XLR)
cable.
7. AC voltage selector
“230”: recommended for 220V-240V power supply voltage
“115”: recommended for 110V-120V power supply voltage
Default setting is 230V
8. FUSE
If in case you need to change the fuse, please resort to replacement fuse with