Manual

same specification with the original.
9. Power input connector
Connect to AC Power supply
Note: Please make sure the AC Voltage Selector is setup correctly for your local
power supply voltage. Incorrect input voltage setting will cause damage to the
machine or might even lead to serious household accident, Cayin reserves the right to
refuse service or responsibility on related instances.
Preparation
1. Connect Power source
Verify that the AC Voltage Selector has been set correctly for your local power
supply voltage, then plug in a power cord and connect to a AC power outlet.
When selector is set at “230” (as displayed on the selector), the DAC is set to
work with 220V-240V power supply voltage. When selector is set at “115” (as
displayed on the selector), the DAC is set to work with 110V-120V power supply
voltage.
Attention: Please make sure the power cord has been disconnected before you
adjust the setting of the AC Voltage Selector.