User manual

Megapixel Cameras and Surveillance Software User Manual
CBC (America) Proprietary Information p.38
should consider the MP3DN day-night camera that uses monochrome sensor in low light conditions and is
sensitive to 0.01 lux .
11. How do I disable the auto startup of the CBC (America) software?
To disable the auto startup of the CBC Software start from Settings Select Control Panel,
Administrative Tools, then double click Services. Under Services (Local) scroll down and
double-click on LMSrv. In the LMSrv Properties window select the General Tab. Under the
Startup Type: choose Disabled.
12. What is the maximum physical distance between computer and CBC camera?
Typical Ethernet 100Base-T has a maximum distance of 100 meters (330 feet). The range can be
increased by using the standard powered mid-span switch. Alternatively, 3Com IntelliJack Switch
that accepts the power over Ethernet can be used to avoid the need to provide mid-span power
supply.
13. Are CBC cameras RoHS compliant?
CBC (America) products confirm to the Europeans Union Restrictions on Use of Hazardous
Substances in Electrical and Electronic equipment (RoHS) Directive 2002/95/EC for six regulated
substances. The certification is applicable to all CBC (America) products shipped after April 15,
2006.
14. Can we mount a motorized zoom lens from another supplier?
Motorized zoom is not supported by the camera, but you can mount the external PTZ unit with
independent controls.
15. How do I access the CBC (America) Megapixel WEB camera home page to view my cameras
remotely.
Simply type in http://200.168.100.10/index.html. Replace bold (200.168.100.10) IP address with
actual camera IP address.
16. Is the Megapixel WEB camera home page compatible with Mozilla Firefox?
You can view photo, video, and adjust the camera setting via the internet using Mozilla Firefox.
17. Does your software include motion detection?
Our software does include motion detection. However, most CBC cameras also support on-board
motion detection that, in contrast to software motion detection, does not take up CPU cycles. The
“on camera” feature was implemented to reduce the overall network bandwidth so the camera
itself will not send images until motion is detected. The user can adjust 3 motion detection
sensitivity settings and specify up to 64 motion detection zones.
18. Can image archival be configured for cyclic recording?
MPS software will overwrite old files every few minutes once the available disk space reaches a
limit value that the end user can set. By default the value is 15GB but can be changed manually
by editing the [storage] field of LocalMachine.ini file located in C:\Program Files\CBC
America\Video Surveillance.