User manual

User’s Manual

sequence, auto-pan or cruise function. Use the right direction key on the

control keyboard to change the setting and the following items will change to

correspond to your selection.

• PRESET

Select a preset point for the PTZ camera to move to when an alarm pin is

triggered. The preset points can be set on a control keyboard.

SEQUENCE

Select a sequence line for the PTZ camera to execute when an alarm pin is

triggered. The sequence line should have previously been defined in the

SEQUENCE setup menu.

AUTOPAN

Select an auto-pan line for the PTZ camera to execute when an alarm pin is

triggered. The auto-pan line can be defined in the AUTOPAN setup menu.

CRUISE

Select a cruise line for the PTZ camera to execute when an alarm pin is

triggered. The cruise line can be defined in the CRUISE setup menu.

• DWELL TIME

The DWELL TIME is the duration required to execute the ALARM ACTION:

preset or sequence. When an alarm occurs, the PTZ camera will move to the

preset position or execute the set sequence function and stay at each

sequence point for a certain period of time (1~127 seconds). If <Always> is

selected, the PTZ camera will move to the preset position and stay there until

the alarm condition is removed or the user rotates the PTZ camera.

NOTE: The DWELL TIME is only accessible when selecting ALARM

ACTION: preset or sequence.

• EXIT

Exit the ALARM SETTING menu.

3.3.13 HOME SETTING

The user can set an operating mode to ensure constant monitoring; if the PTZ camera

is idle for a period of time, the preset function will be activated automatically, this is the

HOME function. The HOME function allows continuous and accurate monitoring and

prevents the PTZ camera stopping or missing events.