User manual

User’s Manual
45
• SCHEDULE MODE
Used to set the scheduling function for the selected scheduling point; the
options are as follows.
NONE
No function will be executed for the schedule.
PRESET
Select one of the defined preset points for the selected schedule.
SEQUENCE
Select one of the eight defined sequence lines for the schedule.
AUTOPAN
Select one of the four defined auto-pan lines for the selected schedule.
CRUISE
Enable the cruise function for the selected schedule.
IR FUNCTION
Select <AUTO> or <ON> to enable the function for the schedule.
3.3.23 EXIT OSD
To exit the OSD setup menu, the user can either select this option or press the ESC
button on the control keyboard.