User manual
CBC (America) www.computarganz.com
33
USER MANUAL
Use DirectX if p ossible is an option to use DirectX functions that utilize
graphics card hardware to display images instead of using the software. This
reduces the load on the CPU. The drop-down list DirectX size provides
options for the graphics area supported by DirectX.
Auto ‒ Startup is an option to automatically restart the CBC America
Video System with the earlier settings after it was stopped.
RealTime if folded is an option to continue running the CBC America
Video System application at the top priority level in the Windows Task
Manager after the application was minimized and placed onto the system tray
of the Windows task bar.
Show motion is an option to mark the areas of the image where motion was
detected.
Use double packets is an option to use data packets with 2904 bytes
instead of the regular 1450 bytes for image transmission. This allows
increasing image transmission bandwidth, but may lead to a less stable
performance on overloaded networks.
Warning on disconnect is an option to display a red screen warning in
place of live video that has been disconnected or temporarily lost. An
alternative (when disabled) is to display the last captured frame.
Static ARP is an option to enable a static link between the cameras MAC
address and its IP address. An alternative is a dynamic ARP that is not
supported by some of the older models of the MP cameras.
Authentication
Authentication is used to set up password-protected access to MP Video
System. For any users there are three levels of access available (
Figure 20
):
Figure 20. Authentication menu