User manual
CBC (America) www.computarganz.com
75
USER MANUAL
21. Does your software include moti on detection?
Our software does include motion detection. However, most MP cameras
also support on-board motion detection that, in contrast to software
motion detection, does not take up CPU cycles. The on camera feature
was implemented to reduce the overall network bandwidth so the camera
itself will not send images until motion is detected. The user can adjust 3
motion detection sensitivity settings and specify up to 64 motion
detection zones.
22. Can image archival be configured for cyclic recording?
MP100 software will overwrite old files every few minutes once the
available disk space reaches a limit value that the end user can set. By
default the value is 15GB but can be changed manually by editing the
[storage] field of LocalMachine.ini file located in C:\Program Files\CBC
America.
23. Every time that I start the software application it starts
recording all frames, even if I set it to record only motion frames.
Is this a bug?
This is a bug that was fixed in software version 3.8.1 and above.
24. How can I register with the "Developer Support Portal?
Access to Developer Support Portal requires an NDA (Non-Disclosure
Agreement, to be signed in paper form prior to obtaining access). More
information can be provided through sales@cbcamerica.com .
25. How do the CBC (America) cameras utilize PTZ (Pan, Tilt, Zoom)?
There is no mechanical PTZ. However MP cameras have multi-megapixel
resolution and allow instantaneous electronic pan, tilt and zoom by
specifying PTZ window coordinates. Multiple users can each select their
own windows, as though each user independently controls the PTZ.
26. How can I get the MP100 built-in web server to work?
MP100 software has built-in web server that allows multi-user remote
access to live video and video archives. This web server can be accessed
from IE browser by typing :
HTTP://ip_address:port/guix.htm
where ip_address is the IP addresses of the computer running MP100 and
the port corresponds to the port number set in the Remote Viewing menu.
Please note that in order to access MP100 server remotely the user should