User manual

Speed Dome Camera Instruction Manual

Pattern

z Function Pattern Function allows the camera to memorize a path (often a curved path) created

by controller joystick for an assigned time. The camera will then retrace the path

exactly as memorized.

4 Patterns are available and Maximum 1200 communication commands can be stored

in a pattern.

S tter be created by one of following two methods.

Method 1) <Set Pattern> [Pattern NO.]

{ Pattern editing screen is displayed as bellow.

z et Pa n Patterns can

EDIT PATTERN 1

[NEAR:SAVE /FAR:DELETE]

0/0/x1/N

{ Movement by Jo rized in a pattern.

maining memor ess bar.

e the reco press FAR key.

OSD

z Run Pattern

Pattern>

reset> [

: <Go Preset> [132]

Delete Pattern to delete a P

ystick and preset movement can be memo

{ The re y size is displayed in progr

{ To sav rding, press NEAR key and to cancel,

Method 2) OSD Using Menu: See the section “How to use OSD Menu”.

Method 1) <Run [Pattern NO.] ex) Run Pattern 2 : <Run Pattern> [2]

Method 2) <Go P Pattern NO.+130] ex) Run Pattern 2

z Use OSD menu attern.

OPERATION