User manual

Speed Dome Camera Instruction Manual

17/74

Installation with Wall Mount Bracket

ྙ Make a hole whose diameter is 30~40mm

on the mounting surface to pass the

wire(s) and cable(s) through the mounting

surface. (In case of the wiring and cabling

through the mounting surface only) Then

prepare the wall mount bracket. Pull the

wire(s) and c

able(s) for the system as

below. Attach the wall mount bracket to the

mounting surface. (Hex Lag #14u50)

ྚ Pull the wire(s) and cable(s) for the

system as below. Wire the cable(s) to the

ports.

After assembling hook of camera

main body with safety wire i

nside the

adaptor. A

fter assembly, fix it with 3r

screws.

(Machine M5u15)

ྛ Assembles dome cover with screws main

body with dome cover. A

fter assembly,

remove protection vinyl from dome cover.

Important Notice

z Before starting the installation, make sure that the Camera ID and Protocol are set up properly.

INSTALLATION