User manual

Speed Dome Camera Instruction Manual

19/74

 Power Description

z Carefully check the voltage and current capacity of the rated power. The rated power is

indicated in the back of main unit.

Rated Power

Input Voltage Range

Current Consumption

DC12V DC 11V ~18V 3.0A

z In case that the length of the power wire is very long, there may be voltage drop and the

syatem may not work properly. Make the length of the power wire as short as possible.



RS-485 Communication

z For PTZ control, connect the cable(s) to your keyboard or DVR. To connect multiple

cameras to a single controller, RS-485 communication should be connected in parallel

as shown below. If you are connecting a single camera to a controller, terminate the

camera. When connecting more than one camera to a single controller, terminate the

last camera on the communication line. The last camera means the camera farthest in

cable length from the controller.GNote that the total length of the communication cable

between a controller and the camera(s) on the same communication line must be less

than 1.2Km.G

 Video

z Use BNC coaxial cable only.

INSTALLATION