User manual

G
G
Speed Dome Camera Instruction Manual
29/74
OSD Display
z P/T/Z Information
Displays the amount of pan from zero degree vertical, the amount of
tilt from zero degree horizontal and current compa
ss direction. Also
identifies the amount of the zoom magnification.
z Camera ID
Displays the selected Camera ID (Address).
z Action Title
Identfies Actions
"SET PRESET xxx"
When Preset xxx is memorized.
"PRESET xxx"
When the camera reaches Preset xxx.
"PATTERN x"
When Pattern x is in action.
"SWGu/PRESET xxx"
When Swing x is in action. Displays both of Swing
number and Preset number.
"UNDEFINED"
When a undefined function is called to run
z Preset Label
Displays preset labels when the camera arrives at presets.
z Alarm Information
Displays activated alarms. This information shows current state of
Alarm Inputs and Relay Outputs. If an Input point is ON state,
it will
show a number corresponding to each point. If an Input point is
OFF
state,
ڂڈڂ
ٻwill be displayed.
Example) The point 2 & 3 of inputs are ON and Output is ON,
OSD will
show as below.
I:-23 O:1
P/T/Z InformationG
Camera IDG
Alarm InformationG
Action TitleG
Preset LabelG
LABEL12345
PRESET1G
I:-2-
O:1G
CAM 1
15/4/x1/N
OPERATION
3