User manual

G
G
Speed Dome Camera Instruction Manual
39/74
Motion Setup
MOTION SETUP
------------------------
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Sets the general functions of Pan/Tilt motions.
z Motion
Lock
[ON/OFF]
If Motion Lock is set to ON, it is impossible to
set up and delete Preset, Swing, Pattern and
Gr
oup. It is possible only to run those
functions. To set up and delete those functions,
enter into OSD menu.
z Power Up
Action
[ON/OFF]
Refer to ೤Other Functions" section.
z Auto Flip
[ON/OFF]
Refer to ೤Other Functions" section.
z Jog Max
Speed
[1q/sec ~360q/sec]
Sets the maximum jog speed. Jog speed is
inversely proportional to the zoom
magnifications. As the zoom magnification
goes up, the pan/tilt speed goes down.
z Jog
Direction
[INVERSE/NORMAL]
Sets the Jog Direction. If this is set to
ೢInverseೣ, t
he view direction in the screen is
same as the direction of joystick. If this is set
to ೢNormalೣ
, the view direction in the
screen is the reverse dirction of joystick.
z Freeze
in Preset
[ON/OFF]
Sets Frame Freeze Function. This feature
freezes the scene
on the monitor when going
to a preset. At the start point of a preset
movement, a camera starts freezing the image
of the start point. Camera keeps displaying
the image of the start point during preset
movement and does not display the images
which camera
gets during preset movement.
As soon as camera stops at preset end point,
camera starts displaying live images which it
gets at the end preset point. This feature also
reduces bandwidth when working with digital
systems or digital network systems.
This f
unction availability should be different
by models.
OSD MENU
4