User manual

G
G
Speed Dome Camera Instruction Manual
44/74
Swing Setup
SWING SETUP
------------------------
SWING NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
RUN SWING
BACK
EXIT
z Swing
Number
[1~8]
Selects a Swing number to edit. If the
selected Swing is not defined, "NOT USED"
is displayed in the
1st Position and the 2nd
Position.
z 1st Position
2nd Position
[PRESET 1~128]
Sets the 2 positions for a Swing function. If
the sel
ected preset is not defined,
"UNDEFINED" is displayed as shown
below.
When a swing function runs, the
camera
moves from the
preset assigned as the 1st
point to the preset a
ssigned as the 2nd
point in CW(Clockw
ise) direction. Then
the camera moves fr
om the preset
assigned as the 2nd point to the preset
assigned as the 1st point in CCW
(Counterclockwise) direction. In case that
the preset assigned as the 1st point and the
preset assigned as the 2nd point are same
or only 1 Preset position is assigned,
the
camera turns on its axis by 360q
in CW
direction and then it turns on its axis by
360
q
in CCW direction.
z Swing
Speed
[1q/sec. ~180q/sec.]
Defines Swing speed
between the 2 Preset
positions from 1
q
/sec to 180
q
/sec
z Clear Swing
[CANCEL/OK]
Deletes the data of the selected Swing.
ٻ
z Run Swing
Runs Swing for the test purposes to check
if it works properly.
ٻ
G
OSD MENU
4
SWING SETUPG
------------------------G
SWING NO. 1G
1ST POS. PRESET5G
2ND POS. NOT USEDG
UNDEFINEDG