User manual

G
G
Speed Dome Camera Instruction Manual
59/74
 Preference
Preference in video compression and transmission: With ‘Bitrate’ selected,
the video compression will be effected by the ‘Bitrate’ value entered. With
‘Quality’ selected, the video compression will be effected by the quality of
image selected. Therefore, ‘Bitrate’ and ‘Quality’ corresponds to CBR and
VBR respectively
 Resolution
Selectable video compression resolution:
NTSC: 720u480, 720u240, 352u480, 352u240
PAL: 720u576, 720u288, 352u576, 352u288
 Frame rate
Selectable video frame rate: Determine the maximum number of frames of
video images to compress. The frame rate of actually transmitted video can
be affected by the network bandwidth limitation
 Quality
The selection is possible with Preference is set to ‘Quality’
 Bitrate
The value is applicable when Preference is set to ‘Bit rate’
 I-Frame
Interval
Possible values between 0 and 255. There will be no I-frames if 0 is selected.
 Motion
Detection
Area
Editing
Configure regions for motion detection. Regions of arbitrary shape can be
configured by the following steps.
ཛGEnable Edit item.
ཛྷGSelect editing Mode. Set is for including cells to motion detection
region and Erase is for excluding.
ཝGSelect cells using the left button of the mouse. Multiple cells can be
selected conveniently by press and dragging.
ཞGPress Apply Edited Area to save the editing.
 Sensitivity
A condition to trigger an event with motion detection. The value determines
the sensitivity of the motion detection within a block: the smaller, the more
sensitive
 Brightness
Controls input video brightness by selecting values between 0 and 100.
 Contrast
Controls input video contrast by selecting values between 0 and 100
 Hue
Controls input video Hue by selecting values between 0 and 100
5
Remote Video Monitoring

Remote Video Monitoring
5
5