Installation guide

Installation Guide
15
3.3 PTZ Camera Setups
Before connecting the camera to other devices of CCTV system, please complete
the camera ID and communication switch setting. These switches are located on the
bottom of the camera.
3.3.1 Switch Definition
Please refer to the following figures and table for switch location and definitions.
Indoor PTZ Camera Outdoor PTZ Camera
A
Camera Control Protocol Switch
B
Communication Switch
C
None
D
22-Pin Connector
E
ID Switch
F
Reserved
G
ISP Connector (for FW upgrade)
3.3.2 Communication Switch Setting
The table below shows the function of each switch within the Communication Switch.
Communication Switch SW 1
SW 2
RS-485 Setting
SW 3
Termination
SW 4
Line Lock
SW 5
Factory Default Reset
SW 6
Reserved