User's Manual

USER’S MANUAL OF WLAN 11G ROUTER Version: 1.0

Mode Click to select the WLAN AP / Client / WDS / AP+WDS

wireless mode.

Site Survey The Site Survey button provides tool to scan the wireless

network. If any Access Point or IBSS is found, you could

choose to connect it manually when client mode is

enabled. Refer to 3.3.9 Site Survey.

SSID It is the wireless network name. The SSID can be 32

bytes long.

Channel Number Select the wireless communication channel from

pull-down menu.

Associated Clients Click the Show Active Clients button to open Active

Wireless Client Table that shows the MAC address,

transmit-packet, receive-packet and transmission-rate for

each associated wireless client.

Enable Mac Clone

(Single Ethernet Client)

Take Laptop NIC MAC address as wireless client MAC

address. [Client Mode only]

Apply Changes Click the Apply Changes button to complete the new

configuration setting.

Reset Click the Reset button to abort change and recover the

previous configuration setting.

3.3.5 Wireless - Advanced Settings

These settings are only for more technically advanced users who have a

sufficient knowledge about wireless LAN. These settings should not be changed

unless you know what effect the changes will have on your WLAN 11g Router.