User's Manual

USER’S MANUAL OF WLAN BROADBAND ROUTER Version: 2.2

1 Introduction

The Wireless LAN Broadband Router is an affordable IEEE 802.11b wireless LAN broadband

router solution; setting SOHO and enterprise standard for high performance, secure,

manageable and reliable WLAN.

This document describes the steps required for the initial IP address assign and other WLAN

router configuration. The description includes the implementation of the above steps.

Notice: It will take about 25 seconds to complete the boot up sequence after powered on

the WLAN Broadband Router; all LEDs are blank while booting except the

Power LED, and after that the WLAN Activity LED will be flashing to show the

WLAN interface is enabled and working now.

1.1 Package contents

The package of the WLAN Broadband Router includes the following items,

 The WLAN Broadband Router

 The AC to DC power adapter

 The Documentation CD

1.2 Product Specifications

Product Name WLAN Broadband Router

Standard 801.11b(Wireless), 802.3(10BaseT), 802.3u(100BaseT)

Data Transfer Rate 11Mbps(Wireless), 100Mbps(Ethernet)

Modulation Method DBPSK/ DQPSK/ CCK

Frequency Band 2.4GHz – 2.497GJz ISM Band, DSSS

RF Output Power < 17 dBm

Receiver Sensitivity 11Mbps better than 8% PER @ -80 dBm

Operation Range 30 to 300 meters (depend on surrounding)

Antenna External Antenna

LED Power, Active (WLAN), Act/Link (Ethernet)

Security 64 bit/ 128 bit WEP, port filtering, IP filtering, MAC

filtering, port forwarding and DMZ hosting

LAN interface One 10/100BaseT with RJ45 connector (WAN)

Four 10/100BaseT with RJ45 connectors (LAN)

Power Consumption 7.5V DC Power Adapter