User's Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Monitor standing positions
- 2.2 Adjusting the monitor
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- 2.5 Performing wireless projection
- 2.6 Connecting the monitor to the Internet
- 2.7 Updating the monitor’s firmware
- 2.8 Announcements
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front/Side view
SECS
2
12
9
8
10
11
Main Menu
Close
Volume
Input Select
Brightness
Main Menu
Close
Volume
Input Select
Brightness
3
4
5
6
7
1. Power button/power indicator
• Turns the monitor on (long press for 2 seconds)/off.
• The color denition of the power indicator is as the below table.
Status Description
Blue On mode
Blue ashing Saving mode
Off Off
Red Charging
Green Finished charging
2. 5-way button
• Turns on the button functions menu. Enacts the selected OSD menu
item.
• Increases/Decreases values or moves your selection up/down/left/
right.
3. Main Menu
• Press the 5-way button once to enter the button functions menu when the
OSD is off. Press this button again to enter the OSD menu.
4. Close
• Move the 5-way button left to close the button functions menu.
• Move the 5-way button left for over 5 seconds to toggle the Key Lock
function between on and off.
5. Volume
• Move the 5-way button right to enter the volume menu.