User's Manual

Copyright © 2012 CCA Inc.
2013-4-19
2
Qi Wireless Charger
1. Electrical specifications
1.1．Physical Properties
Dimensions
(L)175*(W)130*(H)12mm
Products weight
350g
1.2．Electrical specifications
1.3．State remind
LED | State
Standby
Deviating
Charging
Charging end
Failure
Red
/
/
Light
/
Rapid Flash
Green
/
/
/
Light
/
2. User Interface Guide
2.1. When you plug AC adapter and single wireless charger into the socket on the wall, QI product in on standby.
2.2. When a USB device is plugged into the USB socket, up to 2.1A of power will be supplied immediately.
2.3. If a Qi wireless mobile phone placed to Qi logo center position, If a Qi sleeve or Qi battery pack placed to Qi logo
center position, Red LED will be lighted mobile phones show charging.2.4. If the Qi device charging end, Green LED
will light.
2.5. If the Qi device deviating from the coil center too much, LED will turn on slow flashing warning users position shift and
stop charging. If you move back to the center position, charge will automatically start(ref. 2.3).
2.6. If Qi device malfunction, Red LED will Rapid Flash.
Note:
charging saturation tip is from phones emit signal instruction.
Power Input
AC Adapter: AC100-240V, DC 18V/ 1.65A, 3.5 DC.
USB output
5V/2.1A, 10W, Charging for iPad and other smart phone.
Wireless output
DC 6V-9V / Sinusoidal voltage, 5W*2
Charging frequency
110K-205KHZ
Standby power
＜0.3W
Wireless distance
5~8mm
Coil Alignment
Guided Positioning with tactile feedback (Magnetic Attraction)
Wireless efficiency
70% max
Ripple & Noise
＜50mV
Temperature protection
60°C
Protection function
OVP/OCP/OTP/SCP
State remind
LED
Compatibility
All wireless charging receiver terminal facilities that comply with Qi Standard.
Regulatory & Compliance
Design conforms to the Qi standard/Energy star/ERP/CE/FCC/C-Tick, Manufacturing
conform to RoHS/REACH.
Operating Temperature / Humidity
0°C (32 F) – 40°C (104 F), 10 – 85%
Storage Temperature / Humidity
-20°C (-4 F), 60°C (140 F), 95%