Use and Care Manual

Page:11/14
WATER-DRAINAGE
1.Manual drainage :
1.1 When water tank is full and unit stop working, please shut off the unit and unplug
Please don’t move the model sharply, or the water will spilt out from water received
plate.
1.2 Use a water container to take water under the water plug.
1.3 Screw off the water plug and unplug the water blocker, water will come out to the water
container.
1.4 Stuff up the water blocker and screw down the water plug.
2. Continue drainage:
2.1 Sc
rew off the water plug and unplug the water blocker.
2.2 Use water pipe to connect the water outlet. Lead the pipe to the outside or washroom.
Remark: 1.This method can be done only if there is no water in the water received
plate.
2.3This model have self evaporative function, under cooling mode, please don’t use
continue drainage to get better cooling effect.
Notice:Air goes through the unit, some steam in the air will condensate, When it is over 80%
with humidity,the rate of condensating surpasses its self-evaporative rate,some water remains.