Use and Care Manual

Page:6/14
INSTALLATION
1.
Installation
WarningBefore using this unit, please keep it upright at least 2 hours.
The unit can be moved easily among the rooms, but please note
the following:
1.1 Assemble hose adaptorpicture 1
picture 1
1Prepare male and female parts of hose adaptor, they are almost same on the structure
2Each hand hold one part, you can connect them easily.
Remark: Dont push too hard to prevent damage.
1.2 Assembly of the exhaust hose picture 2
(picture 2)
1) Lengthen one head of the hose, screw it into the unit anti-clockwise.
Remarksscrew it to its place, no less than three circles.
2) The same way to connect the hose to the assembled adaptor( At least three circles)
1.3 Installation of window kits. Partially open the window and then fix the window kits to the
window ( picture 3,4 below).
The window kits can be installed on most normal and vertical windows, and it is adjustable.
(Picture3) (Picture 4)