Use and Care Manual

Page:8/14
CONTROL AND SETTING
This portable air conditioner of cooling only model has three functions: cooling, dehumidifying
and fan. If the machine you purchased is cool and heat model, it has four functions cooling,
heating, dehumidifying and fan
Fan has three speeds: high speed, middle speed and low speed,
Setting temperature is 18--30
0
C, 24 hours timer, water-throwing function, sensor and
water-level protective function.
1
、
Control instruction
：
Control panel
：
1.1 When plug in, follow the start music, unit is in standby status. Digital screen will
indicate temperature(Range: 5～35℃/41～95℉),if ambient temperature above
35℃,screen will show “H”. If it is below 5 ℃, it will indicate “L” and the unit will enter
standby status.
1.2 ON/OFF button: When press this button, model will enter cooling mode (Setting
temperature 24℃/75℉), high speed fan. Press again, unit will shut off and play shut-
off music.
1.3 Mode button ：
Press this key to choose Cooling, Heating (only for cool & heat model)Fan , or
Dehumidifying Mode.
1.4 Fan button ：
a) Under cooling mode:
HIGH FAN（ ）→ MIDDLE FAN（ ）→ LOW FAN（ ）→ HIGH FAN （ ）
→…，goes like this.
b) Under fan model: same as cooling mode
c) Under dehumidifying mode, fan is working in low speed
d) If switch between cooling and fan, fan speed won’t change.
1.5 Timer button ：
Press it, icon will flash, “88” areas indicates 24:00; you can set your time
through and buttons. The HOUR number will change from 1,2,3…24; the
Minute number will change from 10, 20,30…50.Auto-shut-off timer is only
Up
Mode
Sleeping
Swing
Fan
Speed
Max cool
Down
On/Off
Timer
Display
Area
Signal
Receptor