Owner's manual

1.0 STORM HOOD ASSEMBLY
1.1 Take the top panel of the storm hood and
place it face down. Bolt side panels to the top
panel using a 7/16” wrench and x3 bolts on
each panel. Two washers, one lock washer
and one nut are provided to secure the
side panels (See FIGURE 1, FIGURE 2,
and FIGURE 3).
FIGURE 1 - PANEL ORIENTATION
FIGURE 2 - BOLT ASSEMBLY
FIGURE 3 - TOP & SIDE PANEL ASSEMBLY
1.2 Take the bottom panel of the storm hood
and fasten it to the side panels. Use a 7/16”
wrench and x2 bolts on each side of the
bottom panel. Two washers, one lock washer
and one nut are provided to secure the side
panels (See FIGURE 4).
FIGURE 4 - BOTTOM PANEL INSTALLATION
1.3 Slide the bird screen into the storm hood until it
reaches the end of the hood (See FIGURE 5).
Snap clips into place to secure the
screen (See FIGURE 6).
STORM HOOD
FOR TYPE EFX EXHAUST FAN
INSTALLATION & OPERATION
INSTRUCTIONS
E-mail: [e-mail] www.ccithermal.com
Date of Issue: January 2013
12089.Rev.1.02
Printed In Canada
ISO 9001
Side Panel
Top Panel
Washer
Lock Washer
Nut
Bolt
Bottom Panel