User's Manual

V. Disassembly of a CCM Regulator for
Maintenance:
The CCM Regulator will serve the end user for many years to come with little
maintenance. Some players wait until their regulator has performance issues
before doing maintenance – however a failed or dirty seal can cause damage to
internal parts of the marker. Therefore, CCM recommends that you clean,
inspect, and lubricate your regulator every so often to prevent any failure or
performance issues. Please use the following steps to disassembling and
maintaining your regulator.
Assembled Regulator
Disassembled Regulator
(From Right: to Left: 3/16
th
Adjustment Screw, Regulator Housing Bottom, Regulator Spring
Seat, Spring, Regulator Piston and O-Ring, Poppet Nut, Poppet Seat, Poppet Pin, Poppet
Spring, Regulator Housing Top, O-Ring.)
1. Unscrew the halves of the regulator. There are flats machined into the
bottom of the regulator to assist in disassembly however, this is often not
necessary to use – your hands are often enough. If you do, use some sort
of protection so that you do not mar the anodizing.