User's Manual

2. Use a adjustable wrench (or a 3/8
th
inch socket) to remove the Regulator
Pin Retainer.
3. Carefully dump out the rest of the pieces from the top of the regulator.
4. Clean (use Q-tips® in all the appropriate places on the regulator top) and
replace the regulator Pin O-Ring if necessary. Apply a light coat of marker
oil to these parts and replace them.
5. Use needle nose pliers to pull out the Regulator Piston and O-ring
(marring the cone portion of the regulator piston is okay - just do not mar
where the regulator pin touches the regulator piston).
You can also take the Velocity Adjustment Screw out of the bottom and
push the piston out with a longer Allen key.