User's Manual

Programming the handset
Standby Screen
Note: Answering system icon is only display when answering system is on
Programmable settings
You can customize the unit by programming the following features using the handset.
Programming by scrolling through the display menus
1. Press [ ], then
2. Press [ ] or [ ] to select the desired main menu and press [ ], then
3. Press [ ] or [ ] to select the desired item in sub-menu 1 and press [ ]
 In some cases, you may need to select from sub-menu 2 and press [ ]
4. Press [ ] or [ ] to select the desired setting and press [ ]
 This step may vary depending on the feature being programmed
 To exit the operation, press [ ] return to idle
Note:
 In the following chart, <> indicates the default setting