User's Manual

Programming the handset
Alarm
An alarm sounds at the set time for 1 minute once or daily. Alarm can be set for each handset.
Important: Set the date and time beforehand
1. Press [MENU], then
2. Press [ ] / [ ] to select ¡CLOCK&ALARM¡ and press [SELECT], then
3. Press [ ] / [ ] to select ¡ALARM¡ and press [SELECT], then
4. Press [ ] / [ ] to select the desired alarm option and press [SELECT]
OFF: Turns alarm off. (Go to step 6)
ONCE: An alarm sounds once at the set time
DAILY: An alarm sounds daily at the set time.
5. Set the desired time.
6. Alarm set (or turned off) and press [ ] return to idle
Alarm melody:
You can select from 3 alarm melody
1. Press [MENU], then
2. Press [ ] / [ ] to select ¡CLOCK&ALARM¡ and press [SELECT], then
3. Press [ ] / [ ] to select ¡ALARM MELODY¡ and press [SELECT], then
4. Press [ ] / [ ] to select the desired alarm tone and press [SELECT]
5. Alarm melody set and press [ ] return to idle
Registering a handset
Additional handset
The base unit of this telephone can support up to a total of 4 cordless handsets. The handsets that ship with your main
base are pre-registered in the factory. To add or re-register a handset:
Handset:
1. Press [ ], then
2. Press [ ] / [ ] to select ¡ADVANCED SET¡ and press [ ], then
3. Press [ ] / [ ] to select ¡REGISTRATION¡ and press [ ], then
4. Handset will show ¡PRESS FIND KEY FOR 5S¡
.
Base:
5. Press and hold the [ ] for 5 seconds. For 28522, the base LED will blink rapidly.
Handset:
6. Handset will have a long beep when success register
Note: An error tone will emit when the registration not success
Important: The unit shall able to register with 28502xxx-A only