User's Manual

Answering system (Available for 28522)
Erasing all messages
1. Press [ ], then
2. Press [ ] / [ ] to select ¡ANSWERER¡ and press [OK], then
3. Press [ ] / [ ] to select ¡DELETE ALL¡ and press [OK], then
4. Press [ ] to confirm
5. Press [ ] return to idle
Memo Recording
Using the [Memo] button on the base, you can record the memo as a new message.
1. Press and hold [ ]
2. After a beep sounds, you should move 9 inches from the base microphone and speak clearly into the base
microphone. (2 minutes max)
3. Release [ ] to stop recording
Remote operation
Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or
change answering system setting.
Secure remote access code
Your answering system allows you to program a secure access code (3-8 digits long) to access your messages while away
from home. The default secure access code is ¡123¡.
To change the remote access code:
1. Press [ ], then
2. Press [ ] / [ ] to select ¡ADVANCED SET¡ and press [ ], then
3. Press [ ] / [ ] to select ¡CHANGE PIN¡ and press [ ], then
4. Input the old remote access code and press [ ], then
5. Input the new remote access code and press [ ], then
6. A beep sound emit
Using the answering system remotely
1. Dial your phone number from a touch-tome phone.
If the answering system is on:
2. After the outgoing message finish, Press [ ] and the answering system will ask you input the remote access
code. Please input the remote access code after the message played.
If the answering system is off:
3. The answering system will ask you input the remote access code. Please input the remote access code after the
message played.