User's Manual

Telephone operation
Make a call
1. Press [ ] or [ ]
2. Dial the phone number
Pre-dial a call
1. Lift the handset and dial the phone number
 To correct a digit, press [ ] and continue entering the phone number
2. Press [ ] or [ ]
Answer a call
When a call is being received, the LCD and keypad backlight flash rapidly
Press [ ] or [ ]
Note: The screen shows the elapsed time as you talk (in hours, minutes and seconds)
End a call
Press [ ] or place the handset on the telephone base or charging cradle.
Speakerphone
During a call, press [ ] to switch between speakerphone and normal handset use. When the speakerphone is active,
the handset screen shows SPKR.
Adjusting the receiver or speaker volume
You can adjust the volume of your handset or speaker anytime during a call
Press [ ] to increase or [ ] to decrease the volume. Continue pressing until desired volume is reached.
Note: Only the incoming volume can be adjusted
Making a call using the redial list
The last 5 telephone numbers dialed are stored in the redial list (each 24 digits max)
1. Press [ ], then
2. press [ ] / [ ] to select the desired phone number, then
3. Press [ ] or [ ]
Erasing a number in redial list
1. Press [ ], then
2. Press [ ] / [ ] to select the desired phone number and press [ ], then
3. Press [ ]/[▼] to select ¡DELETE¡ or ¡DELETE ALL and press [ ], then
4. Press [ ] to confirm