User's Manual

15
Enter the current Master PIN when prompted and then press OK key
to conrm. As you enter the PIN it will be shown as asterisks (*) on the
screen.
Enter the new PIN and then press OK key to conrm.
The setting is saved.
Registration
You can register additional handsets to the base station. The base station
can register up to 4
handsets.
Press MENU on the handset.
Select [ADVANCED SET] > [REGISTRATION], then press [OK] to conrm.
Press and hold on the base station for 5 seconds until you hear a
conrmation beep.
Enter the system PIN. Press [BACK] to make corrections.
Press [OK] to conrm the PIN.
»» Registration is completed in less than 2 minutes. The base automatically
assigns a handset number to the handset.
Note
•• If the PIN is incorrect or no base is found within a certain period, your
handset displays a notification message. Repeat the above procedure if
registration fails.
Unregister the handsets
If two handsets share the same base station, you can unregister a
handset with another handset.
Press MENU.
Select [ADVANCED SET] > [UNREGISTER], then press [OK] to conrm.
Select the handset number to be unregistered.
Press [OK] to conrm.
»» The handset is unregistered.
Tip
• The handset number displays beside the handset name in standby mode.
Restore default settings
You can reset your phone settings to the original factory settings.
1. Press MENU.
2. Select [ADVANCED SET] > [RESET], then press [OK] to conrm.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.