User's Manual

17
»» The handset displays a conrmation request.
3 Press [OK] to conrm.
»» All settings are reset.
Area Code
1. Press MENU.
2. Select [ADVANCED SET] > [AREA CODE], then press [OK] to conrm.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press [OK] to conrm.
NOTE: To restore the default setting to - - -, press and release
BACK button when the screen displays AREA CODE.
Select the recall duration
Ensure that the recall time is set correctly before you can answer a second
call. In normal case, the phone is already preset for the recall duration. You
can select among 3 options: [SHORT], [MEDIUM] and [LONG]. The number
of available options varies with different countries. For details, consult your
service provider.
1 Press MENU.
2 Select [ADVANCED SET] > [FLASH TIME], then press [OK] to conrm.
3 Select an option, then press [OK] to conrm.
»» The setting is saved.
Dial mode
Note: This feature only applies to models that
support both tone and pulse dial.
Dial mode is the telephone signal used in your country. The phone supports
tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed
information.
Set the dial mode
1 Press MENU.
2 Select [ADVANCED SET] > [DIAL MODE], then press [OK] to conrm.
3 Select a dial mode, then press [OK] to conrm.
»» The setting is saved.
Note: If your phone is in pulse dial mode, press [*] button during a
call for temporary tone mode. Digits entered for this call are then
sent out as tone signals.