User's Manual

20
Intercom Operation
An intercom call is a call to another handset that shares the same base
station. A conference call involves a conversation among you, another
handset user and the outside callers.
Make a call to another handset
Note
•• If the base station only has 2 registered handsets,
press INT to make a call to another handset.
1 Press INT. The handsets available for intercom are displayed.
2 Select a handset number, then press [OK] to conrm.
»» The selected handset rings.
3 Press on the selected handset.
»» The intercom is established.
4 Press
EXIT
to cancel or end the intercom call.
Note
•• If the selected handset is occupied in a call, you hear a busy tone.
While you are on the phone
You can go from one handset to another during a call:
1 Press INT.
2 The current caller is put on hold.
3 Select a handset number, then press [OK] to conrm.
Toggle between calls
Press INT to switch between the outside call and the intercom call.
Transfer a call
1 Press INT during a call.
2 Select a handset number, then press [OK] to conrm.
3 Press
EXIT
when the other side answers your call.
»» The call is now transferred to the selected handset.
Make a conference call
A 3-way conference call is a call between you, another handset user and the
outside callers. It requires two handsets to share the same base station.
During an external call
1 Press INT to initiate an internal call.
»» The handsets available for intercom are displayed.
»» The external caller is put on hold.
2 Select or enter a handset number, then press [OK] to conrm.
»» The selected handset rings.