User's Manual

30
machine picks up the call.
1 Press MENU.
2 Select [ANSWER MACHINE] >[SETTINGS] > [RING DELAY], then press [OK] to
conrm.
3 Select a new setting, then press [OK] to conrm.
»» The setting is saved.
Note
Ensure that the answering machine is switched on before this feature can
be applied.
Tip
When you access the answering machine remotely, you are recommended to
set the ring delay to [ECONOMY] mode. This is a cost effective way to manage
your messages.
When there are new messages, the answering machine picks up the call after
3 rings; When there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when you are away from home.
Simply make a call to your phone with a touch tone phone and enter your
4-digit PIN code.
Note
The remote access PIN code is the same as your system PIN. The preset PIN
is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the answering machine.
1 Press MENU.
2 Select [ANSWER MACHINE] > [SETTINGS] > [REMOTE ACCESS], then press [OK]
to conrm.
3 Select a new setting, then press [OK] to conrm.
»» The setting is saved.
Access the answering machine remotely
1 Make a call to your home number with a touch tone phone.
2 Enter # when you hear the announcement.
3 Enter your PIN code, if the remote access code is correct, a conrmation
beep can be heard, and then you need to press the 2 key, within 8 seconds,
to start playing messages.
Note
•• You have 2 chances to enter the correct PIN code before your phone hangs
up.
4 Press a key to carry out a function. See the Remote access commands table
•
•