User's Manual

14
Frequently asked questions
The signal icon blinks on the screen
The handset is out of range. Move it closer to the base station.
If the handset displays [UNREGISTERED], register the handset.
Tip
For more information, see “Registration” on the Advanced settings section.
If I fail to register the additional handsets to the base station, what do I do?
Your base memory is full. Un-register the unused handsets and try again.
No dialing tone
Check your phone connections.
The handset is out of range. Move it closer to the base station.
No docking tone
The handset is not placed properly on the base station/charger.
The charging contacts are dirty.
Disconnect the power supply rst and clean the contacts with a damp cloth.
The handset on the charger does not charge.
Ensure the battery pack is inserted properly.
Ensure the handset is placed properly on the charger. The battery icon
animates when charging.
Batteries are defective. Purchase new ones from your dealer.
No display
Ensure the batteries are charged.
Ensure there are power and phone connections.
Bad audio (crackles, echo, etc.)
The handset is nearly out of range. Move it closer to the base station.
The phone receives interference from the nearby electrical appliances.
Move the base station away from them.
The phone is at a location with thick walls. Move the base away from them.
The handset does not ring.
Ensure the handset ringtone is turned on.
The caller ID does not display.
The service is not activated. Check with your service provider.
The caller’s information is withheld or unavailable.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•