User's Manual

4. Press the mute/menu OK button to confirm and the screen displays the key
tone setting.
Reset Setting
1. Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press caller ID-volume (
 or ) button to scroll to RESET SETTINGS.
4. Press mute/menu OK button to confirm and you may program the following
items: Voicemail, All Settings.
Voicemail
From the Reset Settings Menu:
1. Press the caller ID-volume (
 or ) button to scroll to the VOICEMAIL
sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen displays
YES NO. The default setting is NO.
3. Use the caller ID-volume (

or

) button to move the cursor to YES or NO.
NOTE: If YES is selected, new voicemail icon is cleared from the LCD and
the VMWI LED is turned OFF (on ALL handsets, and the charge/in use LED
on the base).
4. Press the
mute/menu OK
button to save your selection. You will
hear a confirmation tone.
All Settings
As you become familiar with this system, you may prefer to use the system’s
original settings. Follow the steps below to return to the factory default settings.
From the Reset Settings Menu:
1. Press the caller ID-volume ( or ) button to scroll to the ALL SETTINGS
sub-menu.
2. Press the
mute/menu OK
button to enter the menu. The screen displays
YES NO. The default setting is NO.
3. Use the caller ID-volume ( or ) button to move the cursor to YES or NO.
NOTE: If you choose YES all the settings in the programmable menu are
returned to factory default setting.
4. Press the mute/menu OK button to save your selection. You will
hear a confirmation tone.
Telephone Operation
Visual Indicators
Base
The charge/in use indicator on the base will flash to alert you to an incoming call,
during paging, or if you have a message waiting from your service provider. The
indicator will remain lit when a handset is in the base charging or when the line is
in use.
Handset
The TALK/SPEAKER indicator buttons flash when you receive a call and remain