User's Manual

ManualsBrandsCCT Marketing ManualsElectronicsDECT PHONE (BASE STATION FP)

2. Press mute/menu OK button to enter the menu. The screen displays

HANDSET NAME.

3. Use the touch-tone pad to enter a name (up to 15 characters). More than one

letter is stored in each of the number keys. For example, to enter Bill Smith, press

the key twice for the letter B. Press the key times for the letter I. Press the 5 key

times for the letter L. Press the 5 key times for the second letter L, and press the 1

key to insert a space between the first and last name. Press the 7 key times for

the letter S; press the 6 key once for the letter M; press the key times for the letter

I; press the 8 key for the letter T; press the key twice for the letter H.

NOTE: If you make a mistake, use the delete/int/conf button to backspace

and delete one character at a time.

4. Press the mute/menu OK button to save your name. You will hear a

confirmation tone and the handset name shows in the display.

Date and Time

From the Initial Setup Menu:

1. Press the caller ID-volume (



or



) button to scroll to the DATE and TIME

sub-menu.

2. Press mute/menu OK button to enter the menu. Use the number keys to enter

the current date, (for example, 31 December, 2007) key in 071231.

3. Press

mute/menu OK

button to confirm your selection and advance

SET TIME

sub-menu.

4. Use the number keys to enter the current hour and minute, then use the caller

ID-volume

( or ) to select

5. Press the mute/menu OK button to save your selection. You will hear a

confirmation tone and the current time shows in the display.

Area Code

From the Initial Setup Menu:

1. Press the

caller ID-volume

( or ) button to scroll to the

AREA CODE

sub-menu.

2. Press mute/menu OK button to enter the menu. The screen displays SET

AREA CODE - - -

3. Use the touch-tone pad to enter your 3-digit area code.

4. Press the mute/menu OK button to confirm. You will hear a confirmation tone

and the screen displays the new area code.

NOTE: To restore the default setting to - - -, press and release delete/int/conf

when the screen displays SET AREA CODE.

Tone/Pulse

From the Initial Setup Menu:

1. Press the caller ID-volume (

 or ) button to scroll to the TONE/PULSE

sub-menu.

2. Press mute/menu OK button to enter the menu. The screen displays TONE

PULSE. The default setting is TONE.

3. Use the caller ID-volume (



or



) to select TONE or PULSE.

4. Press the mute/menu OK button to confirm. You will hear a confirmation tone