User's Manual

and the screen displays your selection.
Language
From the Initial Setup Menu:
1. Press the caller ID-volume (

or

) button to scroll to the LANGUAGE
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays
ENGLISH ESPANOL.
3. Use the caller ID-volume ( or ) button to scroll to the desired language.
ENGLISH is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the screen displays the selected language.
Auto Talk
When this function is ON, during an external call, you may lift the handset to
answer a call immediately without pressing any buttons.
To end a call, put the handset back on the base cradle directly.
From the Initial Setup Menu:
1. Press the caller ID-volume (
 or ) button to scroll to the AUTO TALK
sub-menu.
2. Press
mute/menu OK
button to enter the menu. The screen displays
> NO
YES.
3. Use the caller ID-volume (

or

) button to scroll to your selection. NO is the
default setting.
4. Press the mute/menu OK button to confirm.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not
recommended that a handset be registered again unless absolutely necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the REGISTRATION
sub-menu.
2. Press the
mute/menu OK
button to enter the menu. The screen displays
YES NO. The default setting is NO.
3. Use the caller ID-volume ( or ) button to scroll to YES or NO.
4. If you select YES, press the mute/menu OK button. The screen displays
HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU
OK KEY. (Your handset should be held near the base during registration
process.)
5. Press and hold the find button on the base unit, the charge/in use indicator
flashes. Press the handset mute/menu OK button.
The screen displays REGISTERING, then the screen displays REGISTERED.
You may now rename your handset. (Refer to Step of Handset Name Section)
NOTE: If you are re-registering the handset through the handset menu; to
rename your handset you must go to the Handset Name Section and start
from the beginning step.