User's Manual

the letter S; press the 6 key once for the letter M; press the key times for the letter
I; press the 8 key for the letter T; press the key twice for the letter H.
NOTE: If you make a mistake press the delete/int/conf button to backspace
and erase the wrong character(s) or number(s).
4. Press the mute/menu OK button again to save your selection. The screen
displays ENTER NUMBER.
5. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses), and press the mute/menu button to confirm and advance SET
MELODY sub-menu.
6. Use the caller ID-volume (
 or ) button to select from melody 01 to melody
10 (a testing tone is generated while making melody selection).
7. Press mute/menu OK button to confirm, the records are stored alphabetically
in the phone book.
Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the #pause/ringer button on the handset’s touch-tone pad to insert a delay
in dialing sequence when a pause is needed to wait for a dial tone (for example,
after you dial 9 for an outside line, or to wait for a computer access tone.) Each
pause counts as one digit in the dialing sequence.
Edit Records
From Phonebook Sub-Menu:
1. Use the caller ID-volume ( or ) button to scroll to EDIT RECORDS.
2. Press the
mute/menu OK
button to confirm, the screen displays the records.
3. Use the caller ID-volume ( or ) button or key in alphabet to move to
desired record, press mute/menu OK button to confirm. The screen displays
ENTER NAME
.
4. Repeat Steps 3 through 7 in “Add Records” section.
Delete Records
From Phonebook Sub-Menu:
1. Use the caller ID-volume ( or ) button to scroll to DELETE RECORDS.
2. Press the mute/menu OK button to confirm, the screen displays the records.
3. Use the caller ID-volume ( or ) button or key in alphabet to move to
desired record, press the delete/int/conf button. The screen displays DELETE?.
4. Press the delete/int/conf button again to confirm.
NOTE: If you don’t want to change or delete a record, simply press the END
button, or wait for one minute to exit automatically.
Dialing a Number from Internal Memory
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to access the phonebook sub-menu.
3. Use the caller ID-volume (
 or ) button to scroll to VIEW RECORDS.
4. Press the mute/menu OK button to confirm
5. Use the caller ID-volume (

or

) button or key in alphabet to move to the
desired number.
6. Press the TALK/SPEAKER buttons, the number dials automatically.