User's Manual

14
an incoming call. To answer a call, you will need to switch it
back on. It may take some time for the handset to re-establish a
radio link with the base unit.
Keypad lock
To lock the cordless handset’s keypad:
Press and hold [*] button for 2 seconds until you hear a beep tone, when
the keypad lock is activated, shows on the display.
To unlock the keypad:
Press and hold [*] button for 2 seconds until you hear a beep tone. Or
simply replace the handset on the charger cradle.
Charge/in use Indicator on Base
The charge/in use indicator on the base will flash to alert you to an
incoming call, the indicator will remain lit when a handset is in the base
charging or when the line is in use.
IMPORTANT: In order to use this unit’s Visual Message Waiting
Indicator (VMWI) feature, you must subscribe to this service
from your phone company.
Set time and date
Note: If you subscribe to the Caller Display service, the time and
date will be set automatically when you receive a call.
Press MENU/OK key to enter main menu.
Press the Navigation (

or

) button to select Set Date/Time and then
press MENU/OK key to select.
The display shows 00:00 01/01, enter the current date and time, then
press MENU/OK key to confirm. A confirmation beep is played.
Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to
handset so the party you are speaking to can hear you.
To switch the speakerphone on or off during a call, press the TALK/SPEAKER
button.
When the speakerphone is on, the speaker symbol appears on handset
display.
1.
2.
3.