User's Manual

22
To pre-record an outgoing message you must first follow the
procedure to set the answer mode.
Record a personalised outgoing message
* You can choose to replace the predefined OGM with your own pre-
recorded personalised messages.
Repeat steps 1 to 4 on Set the Answer mode section.
Display shows Select mess. > Predefined
Press the Navigaton (

or

) button to select Personalised and press
the MENU/OK button.
Display shows > Play message
Press the MENU/OK button to play the existing message
Press the Navigaton (

or

) button to select Record Mess. and then
press MENU/OK button to record a new message
Display shows > Record mess.
Speak clearly into the handset, press the MENU/OK button to end the
recording. Your message will be played back automatically.
Display shows Select mess. > Personalised
If you are not satisfy with the result, repeat from step 2.
Press the BACK/R/C button to exit the menu or press the HANG UP
button to return to standby mode.
Set ring delay
Press the MENU/OK key to enter menu selection.
Press the Navigation (

or

) key to select Answ. Machine and then
press MENU/OK key to select.
Press the Navigation (

or

) key to select Settings.
Press MENU/OK key to display Ring Delay, press MENU/OK button to
enter option list.
Press the Navigation (

or

) key to select Rings 3-8 or Toll Saver and
then press MENU/OK key to confirm your choice.
A confirmation beep is played. Press HANG-UP key to go back to
standby mode.
* If you select Toll Saver mode, the answering machine will answer calls
and start playing the greeting message after 5 rings if you have no new
messages, or after 3 rings if there is at least one new message recorded.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
6.