User's Manual

Telephone base settings

Clear voicemail indicator

You can reset the VMWI (voice message waiting indicator) when the phone indicates

new messages waiting but there are none (for example, if you have previously

accessed voice mail from a dierent telephone line while away from home). When

new voice mails do exist, your telephone service provider will continue to send the

signal to activate the feature.

1. Press the Menu softkey when the handset is in idle mode.

2. Press

/ or use the scroll wheel to select Adv. Settings and then press the

Select softkey.

3. Press

/ or use the scroll wheel to select Clear VoiceMail and then press the

Select softkey.

4. Press the Yes softkey to conrm.

Reset setting

This feature allows you to restore all system settings, except the answering system

messages and phonebook, to default settings. This feature could be useful, if you have

forgotten the security code to access the answering system remotely.

1. Press the Menu softkey when the handset is in idle mode.

2. Press

/ or use the scroll wheel to select Adv. Settings and then press the

Select softkey.

3. Press

/ or use the scroll wheel to select Reset setting and then press the

Select softkey.

4. Press the Yes softkey to conrm.

NOTE: All settings under the Ans. Sys Setup, Direct Memories, Clock & Alarm, Settings, Adv. Settings and

Bluetooth menus will be restored to default settings, the redial list and call log will also be cleared.