User's Manual

Phonebook
32
Delete all phonebook entries
1. Press when in idle mode.
2. Press
/ or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press the Options softkey.
4. Press
/ or use the scroll wheel to select Delete All, then press the Select
softkey.
5. Press the Yes softkey to conrm.
Phonebook capacity
This feature allows you to check the remaining capacity of the phonebook.
1. Press
when in idle mode.
2. Press
/ or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press
/ or use the scroll wheel to select entry, then press the Options softkey.
4. Press
/ or use the scroll wheel to select PB Capacity, then press the Select
softkey. The screen then displays X/Y, where X indicates the number of entries
stored while Y indicates the capacity of the selected phonebook.
For example, 241/1500 means that there are 241 entries in a phonebook, which
has a maximum capacity of 1500 entries.
Direct memory
You can program 20 phone numbers into the memory location buttons 1-10 and
shift 1-10 in the telephone base for quick dialing.
To program a memory location:
1. Press the Menu softkey when the telephone base is in idle mode.
2. Press
/ or use the scroll wheel to select Direct Memory, then press the Select
softkey.
3. Press buttons 1-10 for locations 1-10, or press button shift followed by 1-10 for
locations 11-20.
4. Enter the number (max. 24 digits). If you need a pause between digits, press and
hold the
until a P appears in the display. This will insert a 3-second pause in
the dialing sequence.
5. Press the Save softkey to conrm.
To dial from a memory location:
Press the desired memory location button on the telephone base, the number will be
dialed automatically using the speakerphone.
-OR-