User's Manual

34
Caller ID
Using Caller ID service
IMPORTANT: You must subscribe to Caller-ID services from your telephone service
provider(s) to receive Caller ID information.
Caller ID records from Line 1 line and Line 2 line are stored separately and in the order
that they are received.
Your telephone stores stores caller ID memory for the 100 most recent calls. When the
101st call is received, the oldest Caller ID record (rst call) is automatically deleted.
Phonebook Caller-ID matching
If the last seven digits of an incoming telephone number match a telephone number
in your phonebook, the name from this entry will display on the screen.
For example, if Michael Jones calls, and his number is saved in the phonebook under
the name MIKE, the screen displays the name MIKE.
NOTE: The number you see on your caller ID is in the format sent by the telephone service provider. It usually
delivers 10-digit telephone numbers (area code plus telephone number). If the last seven digits of the incoming
telephone number do not match with a number in your phonebook, the name appears as it is delivered by the
telephone service provider.
Review/call from the call log
As calls are received and stored, the display is updated to let you know new calls have
been received. To scroll through the caller ID records:
1. Press
when the handset is in idle mode.
2. Press
/ or use the scroll wheel to select Line 1 or Line 2, then press the Select
softkey.
3. Press
/ or use the scroll wheel to scroll through the phonebook. When the
desired record is displayed, press
or to call from Line 1 line, or press
to call from Line 2 line.
-OR-
Press
repeatedly until the phone number is shown in the desired format (for
example, when 555-5555 is displayed, press
to change the format of the
phone number to 555-555-5555, 1-555-555-5555, and back to 555-5555), then
press or to call from Line 1 line, or press to call from Line 2
line.
Save a number to the Local Phonebook
1. Press when the handset is in idle mode.
2. Press
/ or use the scroll wheel to select Line 2 or Line 2, then press the Select
softkey.
3. Press
/ or use the scroll wheel to select the desired entry, then press the
Options softkey.