User's Manual
Getting started
2
Installing on a desk
1. Remove the base bracket by lifting it up from both sides of the bracket as shown in
Figure 1 below.
Figure 1
2. Plug one end of the coiled handset cord into the jack at the bottom of the
telephone base as shown in gure 2. Plug the other end of the coiled cord into the
bottom of the handset making sure that the plug is snapped into place and ush
with the bottom of the handset. Then route the coiled cord through the tabbed slot
as shown.
3. Slide the desk/wall switch to the desk position.
Figure 2
desk wall
Route
the cord
through the
tabbed slot.