User's Manual

Getting started
4
CAUTION:
1. Use only the power adaptor that came with this unit. Using other power adaptors may damage the unit.
2. To prevent re or electrical shock hazard, do not expose this product to rain or moisture.
If you have separate wall jacks for each line, install the telephone base as
described below.
9. Plug one end of the 4-pin gray-color telephone line cord into the Line 1 + Line 2
jack at the back of the telephone base as shown in Figure 5.
10. Plug the other end of the 4-pin gray-color telephone line cord into the telephone
wall jack you will use as your “line 1”.
11. Plug one end of the 2-pin black-color telephone line cord into the Line 2 jack at the
back of the telephone base.
12. Plug the other end of the 2-pin black-color telephone line cord into the telephone
wall jack you will use as your “line 2”.
13. Press or as desired. The speakerphone is activated automatically.
14. If you hear a dial tone, the installation is complete.
Figure 5
desk wall
DSL lters (not included)
are required if you have
DSL high speed Internet
service.