User's Manual

Telephone operation

Push to talk (PTT)

You can directly broadcast messages to the speakerphone of any

registered handset in the system.

To initiate a PTT:

1. Press the PTT button on the right side of the handset.

J( If your telephone system has only two handsets registered, the

broadcast will be automatically directed to the other system

handset.

J( If your telephone system has more than two handset. Press

to select the handset you want to broadcast the message, or

select ALL HANDSET to broadcast to all handsets and then press

2. PRESS AND HOLD (PTT) TO TALK shows on the screen when the

connection is set between the initiating handset and the destination

handset.

3. Press and hold the PTT button on either handset to start the

broadcast.

NOTE: Connection set between handsets lasts for 30 minutes after it is established, or 30

minutes after the last broadcast. You will need to perform the above operation again if you

want to initiate a PTT to another system handset or after the 30-minute time out.