User's Manual

Bluetooth settings
18
5. The screen displays Place the headset near the base. Move your Bluetooth
headset near the telephone base, and then press the OK softkey.
6. The screen displays Please set your headset in discoverable mode. Turn your
Bluetooth headset to discoverable mode, and then press the OK softkey.
 :KHQWKHWHOHSKRQHEDVH¿QGV\RXUKHDGVHWSUHVVWKHSelect softkey.
8. The screen displays XX Paired when the pairing is successful.
9. The telephone base then asks if you want to connect your headset with the
telephone base now. Press the Yes softkey to connect.
When the connection is successfully established, the screen displays XX Connected
where XX indicates the name of your headset.
To remove a paired device
You can remove a paired device from the Paired Devices list.
1. Press the Menu softkey.
2. Press
/ or use the scroll wheel to scroll to Bluetooth, and then press the Select
softkey.
3. Press
/ or use the scroll wheel to select My Devices, and then press the Select
softkey.
4. Press
/ or use the scroll wheel to select Paired Devices, and then press the
Select softkey.
5. Press
/ or use the scroll wheel to select the desired device, and then press the
Select softkey.
6. Press
/ or use the scroll wheel to select Remove Paired, and then press the
Select softkey.
7. The screen displays Remove? Press the YesVRIWNH\WRFRQ¿UP
Active Devices
Only devices on the Active Devices list can establish a Bluetooth connection with the
telephone base. The Active Device list can store a maximum of two devices. Both
devices can be connected to the telephone base, but only one of them can be used at
a time.
To activate a paired device
To allow a paired device to establish a Bluetooth connection to the telephone base, it
must be activated.
1. Press the Menu softkey.
2. Press
/ or use the scroll wheel to select Bluetooth, and then press the Select
softkey.
3. Press
/ or use the scroll wheel to select My Devices, and then press the Select
softkey.