User's Manual

Remark: The handset is dual-face chargeable. You can place the handset on

the cradle with either one side facing you to proceed charging.

INSTALLING BASE UNIT BATTERIES

NOTE: AA size batteries are not included in the package.

NOTE: Alkaline AA size batteries are recommended to use.

Batteries inserted in the base unit allow you to use the telephone when the

adaptor is damaged or there is no power supply.

1. Open the battery door at the bottom of the base.

2. Insert four AA size batteries.

3. Close the battery door.

Battery Door

WALL MOUNTING THE BASE

NOTE: For the best result, leave the phone on a flat surface during initial charging before you

hang the phone on the wall.

1. Turn the base over.

2. Attach the wall mounting pedestal by first inserting the tabs on the open

edge of the pedestal into the slots on the lower portion of the bottom of the

base. Then push down and snap the pedestal into place.

3. Slip the mounting holes (on the back of the pedestal) over the wall plate

posts and slide the unit down into place. (Wall plate not included).